Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Advanced Manufacturing Processes II PDF full book. Access full book title Advanced Manufacturing Processes II by Volodymyr Tonkonogyi. Download full books in PDF and EPUB format.
Author: Volodymyr Tonkonogyi Publisher: Springer Nature ISBN: 3030680142 Category : Technology & Engineering Languages : en Pages : 868
Book Description
This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
Author: Volodymyr Tonkonogyi Publisher: Springer Nature ISBN: 3030680142 Category : Technology & Engineering Languages : en Pages : 868
Book Description
This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
Author: Bartosz Gapiński Publisher: Springer ISBN: 303016943X Category : Technology & Engineering Languages : en Pages : 653
Book Description
This book covers a variety of topics related to machine manufacturing and concerning machine design, product assembly, technological aspects of production, mechatronics and production maintenance. Based on papers presented at the 6th International Scientific-Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019, the different chapters reports on cutting-edge issues in constructing machine parts, mechatronic solutions and modern drives. They include new ideas and technologies for machine cutting and precise processing. Chipless technologies, such as founding, plastic forming, non-metal construction materials and composites, and additive techniques alike, are also analyzed and thoroughly discussed. All in all, the book reports on significant scientific contributions in modern manufacturing, offering a timely guide for researchers and professionals developing and/or using mechanical engineering technologies that have become indispensable for modern manufacturing.
Author: Volodymyr Tonkonogyi Publisher: Springer Nature ISBN: 3030407241 Category : Technology & Engineering Languages : en Pages : 643
Book Description
This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Author: Sergej Hloch Publisher: Springer Nature ISBN: 3030719561 Category : Technology & Engineering Languages : en Pages : 424
Book Description
This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.
Author: Peter F. McGoldrick Publisher: Springer Science & Business Media ISBN: 1461585244 Category : Science Languages : en Pages : 422
Book Description
EN Corlett Joint-Chairman - COPED, University of Nottingham, Nottingham, UK The contributions offered to this Third National Conference demonstrate that research in production is very much alive. The considerable numbers of papers on robotics, automation and flexible manufacturing systems, together with those in production control and quality matters, demonstrate that there is much work going on in our colleges, polytechnics and universities related to modern methods of manufacture. The future of manufacture undoubtedly hinges on better control. Control over the supply and movement of materials is now keenly sought. Control over manufacturing equipment is also a goal, not just to maintain quality but to give flexibility in sequence and quantity. None of these objectives for improved performance is entirely a technical matter, although there is an increasing technical ability to influence all of them. To achieve their potential, they depend on competent people at all levels. Discussion with alert managers soon reveals that this is one of their major concerns. Either the people they have require more training, or they cannot hire the people with the abilities they need. This applies at all levels, and the availability of people with competence in manufacture is particularly low.
Author: Rupinder Singh Publisher: CRC Press ISBN: 100054902X Category : Technology & Engineering Languages : en Pages : 200
Book Description
This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Author: Francisco Cavas-Martínez Publisher: Springer ISBN: 3030123464 Category : Technology & Engineering Languages : en Pages : 824
Book Description
This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Author: Adam Hamrol Publisher: Springer ISBN: 3030187896 Category : Technology & Engineering Languages : en Pages : 400
Book Description
This book covers a variety of topics in manufacturing, with a special emphasis on product design, production planning, and implementation of both resources and production processes. The content is based on papers presented at the 6th International Scientific Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019. The main focus is on showing best practices to use tools currently available in the enterprises to effectively improving industrial processes. Knowledge and production flow management, decision-making systems, production leveling, enterprise efficiency, as well as maintenance, modeling and simulation of production processes are just some of the topics discussed in this book, which offers a timely and practice-oriented reference guide for applied researchers, product engineers and product managers.
Author: Magdalena Diering Publisher: ISBN: 9783030186838 Category : Decision support systems Languages : en Pages :
Book Description
This book gathers timely contributions on metrology and measurement systems, across different disciplines and field of applications. The chapters, which were presented at the 6th International Scientific-Technical Conference, MANUFACTURING 2019, held on May 19-21, 2019, in Poznan, Poland, cover cutting-edge topics in surface metrology, biology, chemistry, civil engineering, food science, material science, mechanical engineering, manufacturing, metrology, nanotechnology, physics, tribology, quality engineering, computer science, among others. By bringing together engineering and economic topics, the book is intended as an extensive, timely and practice-oriented reference guide for both researchers and practitioners. It is also expected to foster better communication and closer cooperation between universities and their business and industry partners.
Author: Volodymyr Tonkonogyi
Author: Volodymyr Tonkonogyi
Author: Bartosz Gapiński
Author: Peter F. McGoldrick
Author: Volodymyr Tonkonogyi
Author: Sergej Hloch
Author: Peter F. McGoldrick
Author: Rupinder Singh
Author: Francisco Cavas-Martínez
Author: Adam Hamrol
Author: Magdalena Diering