Author: Sara Russell Gonzalez
Publisher: Rowman & Littlefield
ISBN: 1442255498
Category : Language Arts & Disciplines
Languages : en
Pages : 191
Book Description
Planning and implementing a 3D printing service in a library may seem like a daunting task. Based upon the authors’ experience as early adopters of 3D technology and running a successful 3D printing service at a large academic library, this guide provides the steps to follow when launching a service in any type of library. Detailed guidance and over 50 graphics provide readers with sage guidance and detailed instructions on: planning a proposal printer selection tips preparing the location addressing staff concerns for new service developing service workflows and procedures managing inevitable disasters developing policies conducting the “reference interview” for 3D printing staff training tips outreach activities This book brings into one place all the guidance you need for developing and implementing a 3D printing service in any library.
3D Printing
Author: Sara Russell Gonzalez
Publisher: Rowman & Littlefield
ISBN: 1442255498
Category : Language Arts & Disciplines
Languages : en
Pages : 191
Book Description
Planning and implementing a 3D printing service in a library may seem like a daunting task. Based upon the authors’ experience as early adopters of 3D technology and running a successful 3D printing service at a large academic library, this guide provides the steps to follow when launching a service in any type of library. Detailed guidance and over 50 graphics provide readers with sage guidance and detailed instructions on: planning a proposal printer selection tips preparing the location addressing staff concerns for new service developing service workflows and procedures managing inevitable disasters developing policies conducting the “reference interview” for 3D printing staff training tips outreach activities This book brings into one place all the guidance you need for developing and implementing a 3D printing service in any library.
Publisher: Rowman & Littlefield
ISBN: 1442255498
Category : Language Arts & Disciplines
Languages : en
Pages : 191
Book Description
Planning and implementing a 3D printing service in a library may seem like a daunting task. Based upon the authors’ experience as early adopters of 3D technology and running a successful 3D printing service at a large academic library, this guide provides the steps to follow when launching a service in any type of library. Detailed guidance and over 50 graphics provide readers with sage guidance and detailed instructions on: planning a proposal printer selection tips preparing the location addressing staff concerns for new service developing service workflows and procedures managing inevitable disasters developing policies conducting the “reference interview” for 3D printing staff training tips outreach activities This book brings into one place all the guidance you need for developing and implementing a 3D printing service in any library.
Micrographics
Author: William Saffady
Publisher: Littleton, Colo. : Libraries Unlimited
ISBN:
Category : Computers
Languages : en
Pages : 280
Book Description
Publisher: Littleton, Colo. : Libraries Unlimited
ISBN:
Category : Computers
Languages : en
Pages : 280
Book Description
Directory of Library Reprographic Services
3-D Printers for Libraries
Author: Jason Griffey
Publisher: American Library Association
ISBN: 083895930X
Category : House & Home
Languages : en
Pages : 33
Book Description
As the maker movement continues to grow and 3-D printers become more affordable, an expanding group of hobbyists is keen to explore this new technology. In the time-honored tradition of introducing new technologies, many libraries are considering purchasing a 3-D printer. Jason Griffey, an early enthusiast of 3-D printing, has researched the marketplace and seen several systems first hand at the Consumer Electronics Show. In this report he introduces readers to the 3-D printing marketplace, covering such topics as How fused deposition modeling (FDM) printing workBasic terminology such as build plate, spool, nozzle hot end, direct extruder, and Bowden extruderPlastics used, such as ABS, PLA, and othersDescriptions, price ranges, and filament specs for 3-D printers from MakerBot, Printrbot, Solidoodle, and other manufacturersSuggested staff skills for performing basic maintenance tasksWhere to find both ready-to-use designs and the software for customizing, from beginning to advanced systems
Publisher: American Library Association
ISBN: 083895930X
Category : House & Home
Languages : en
Pages : 33
Book Description
As the maker movement continues to grow and 3-D printers become more affordable, an expanding group of hobbyists is keen to explore this new technology. In the time-honored tradition of introducing new technologies, many libraries are considering purchasing a 3-D printer. Jason Griffey, an early enthusiast of 3-D printing, has researched the marketplace and seen several systems first hand at the Consumer Electronics Show. In this report he introduces readers to the 3-D printing marketplace, covering such topics as How fused deposition modeling (FDM) printing workBasic terminology such as build plate, spool, nozzle hot end, direct extruder, and Bowden extruderPlastics used, such as ABS, PLA, and othersDescriptions, price ranges, and filament specs for 3-D printers from MakerBot, Printrbot, Solidoodle, and other manufacturersSuggested staff skills for performing basic maintenance tasksWhere to find both ready-to-use designs and the software for customizing, from beginning to advanced systems
Directory of Library Reprographic Services
Author: Joseph Z. Nitecki
Publisher: Westport, Conn. : Published for the Reproduction of Library Materials Section, RTSD-American Library Association by Meckler Pub.
ISBN:
Category : Language Arts & Disciplines
Languages : en
Pages : 558
Book Description
Publisher: Westport, Conn. : Published for the Reproduction of Library Materials Section, RTSD-American Library Association by Meckler Pub.
ISBN:
Category : Language Arts & Disciplines
Languages : en
Pages : 558
Book Description
3D Printing in Medical Libraries
Author: Jennifer Herron
Publisher: Rowman & Littlefield
ISBN: 1538118807
Category : Language Arts & Disciplines
Languages : en
Pages : 196
Book Description
Supporting tomorrow’s doctors involves preparing them for the technologies that will be available to them. 3D printing is one such technology that is becoming more abundant in health care settings and is similarly a technology libraries are embracing as a new service offering for their communities. 3D Printing in Medical Libraries: A Crash Course in Supporting Innovation in Health Care will provide librarians interested in starting or enhancing a 3D printing service an overview of 3D printing, highlight legal concerns, discuss 3D printing in libraries through a literature review, review survey results on 3D printing services in health sciences and medical libraries, and offer case studies of health sciences and medical libraries currently 3D printing. Additionally, resources for finding medically related models for printing and tips of how to search for models online is also provided, along with resources for creating 3D models from DICOM. Common print problems and troubleshooting tips are also highlighted and lastly, marketing and outreach opportunities are discussed. Herron presents the nitty-gritty of 3D printing without getting too technical, and a wealth of recommended resources is provided to support librarians wishing to delve further into 3D printing. Design thinking and the Maker Movement is also discussed to promote a holistic service offering that supports users not only with the service but the skills to best use the service. Readers will finish the book with a better sense of direction for 3D printing in health sciences and medical libraries and have a guide to establishing or enhancing a 3D printing in their library. This book appeals to health sciences libraries and librarians looking to start a 3D printing service or understand the 3D printing space as it relates to medical education, practice, and research. It serves as: a field guide for starting a new library service a primer for meeting the information needs of medical faculty, staff, and students a useful reference for a deep dive into this space by librarians who are already actively carrying out some of the kinds of work described herein
Publisher: Rowman & Littlefield
ISBN: 1538118807
Category : Language Arts & Disciplines
Languages : en
Pages : 196
Book Description
Supporting tomorrow’s doctors involves preparing them for the technologies that will be available to them. 3D printing is one such technology that is becoming more abundant in health care settings and is similarly a technology libraries are embracing as a new service offering for their communities. 3D Printing in Medical Libraries: A Crash Course in Supporting Innovation in Health Care will provide librarians interested in starting or enhancing a 3D printing service an overview of 3D printing, highlight legal concerns, discuss 3D printing in libraries through a literature review, review survey results on 3D printing services in health sciences and medical libraries, and offer case studies of health sciences and medical libraries currently 3D printing. Additionally, resources for finding medically related models for printing and tips of how to search for models online is also provided, along with resources for creating 3D models from DICOM. Common print problems and troubleshooting tips are also highlighted and lastly, marketing and outreach opportunities are discussed. Herron presents the nitty-gritty of 3D printing without getting too technical, and a wealth of recommended resources is provided to support librarians wishing to delve further into 3D printing. Design thinking and the Maker Movement is also discussed to promote a holistic service offering that supports users not only with the service but the skills to best use the service. Readers will finish the book with a better sense of direction for 3D printing in health sciences and medical libraries and have a guide to establishing or enhancing a 3D printing in their library. This book appeals to health sciences libraries and librarians looking to start a 3D printing service or understand the 3D printing space as it relates to medical education, practice, and research. It serves as: a field guide for starting a new library service a primer for meeting the information needs of medical faculty, staff, and students a useful reference for a deep dive into this space by librarians who are already actively carrying out some of the kinds of work described herein
Directory of Library Reprographic Services
Author: Joseph Z. Nitecki
Publisher: Weston, Conn. : Published for the Reproduction of Library Materials Section, RTSD-American Library Association by Microform Review
ISBN:
Category : Reference
Languages : en
Pages : 200
Book Description
Directory of international library reprographic services (incl. Electrostatic copy, photocopying, microfilm, microfiche, slides, etc.), together with current costs and time taken. Bibliography pp. 177 and 178.
Publisher: Weston, Conn. : Published for the Reproduction of Library Materials Section, RTSD-American Library Association by Microform Review
ISBN:
Category : Reference
Languages : en
Pages : 200
Book Description
Directory of international library reprographic services (incl. Electrostatic copy, photocopying, microfilm, microfiche, slides, etc.), together with current costs and time taken. Bibliography pp. 177 and 178.
A History of ALA Policy on Intellectual Freedom
Author: Office for Intellectual Freedom (OIF)
Publisher: American Library Association
ISBN: 0838913253
Category : Language Arts & Disciplines
Languages : en
Pages : 359
Book Description
Collecting several key documents and policy statements, this supplement to the ninth edition of the Intellectual Freedom Manual traces a history of ALA’s commitment to fighting censorship. An introductory essay by Judith Krug and Candace Morgan, updated by OIF Director Barbara Jones, sketches out an overview of ALA policy on intellectual freedom. An important resource, this volume includes documents which discuss such foundational issues as The Library Bill of RightsProtecting the freedom to readALA’s Code of EthicsHow to respond to challenges and concerns about library resourcesMinors and internet activityMeeting rooms, bulletin boards, and exhibitsCopyrightPrivacy, including the retention of library usage records
Publisher: American Library Association
ISBN: 0838913253
Category : Language Arts & Disciplines
Languages : en
Pages : 359
Book Description
Collecting several key documents and policy statements, this supplement to the ninth edition of the Intellectual Freedom Manual traces a history of ALA’s commitment to fighting censorship. An introductory essay by Judith Krug and Candace Morgan, updated by OIF Director Barbara Jones, sketches out an overview of ALA policy on intellectual freedom. An important resource, this volume includes documents which discuss such foundational issues as The Library Bill of RightsProtecting the freedom to readALA’s Code of EthicsHow to respond to challenges and concerns about library resourcesMinors and internet activityMeeting rooms, bulletin boards, and exhibitsCopyrightPrivacy, including the retention of library usage records
Transforming Print
Author: Shari Laster
Publisher: ALA Editions
ISBN: 9780838948828
Category : Language Arts & Disciplines
Languages : en
Pages :
Book Description
In this book, collection management staff at academic libraries will find fertile ideas for transforming print collections to become more engaging and widely used by the diverse communities they serve.
Publisher: ALA Editions
ISBN: 9780838948828
Category : Language Arts & Disciplines
Languages : en
Pages :
Book Description
In this book, collection management staff at academic libraries will find fertile ideas for transforming print collections to become more engaging and widely used by the diverse communities they serve.
INFORMATION SOURCES, SERVICES AND SYSTEMS
Author: GURDEV SINGH
Publisher: PHI Learning Pvt. Ltd.
ISBN: 8120346394
Category : Language Arts & Disciplines
Languages : en
Pages : 532
Book Description
Reference and information services are considered an important activity of a modern library. This comprehensive and student-friendly book discusses in detail different types of information and reference sources and services, such as encyclopaedias, directories, yearbooks, dictionaries, geographical sources, biographical sources, statistical sources and handbooks. The book is organised into four parts. Part I deals with various types of information sources such as documentary and non-documentary sources. Part II discusses different types of reference services, organisation of reference section and the role of the librarian in the digital age. Part III describes the wide range of information service such as Current Awareness Service (CAS) and Selective Dissemination of Information (SDI). Part IV provides an overview of important information systems such as National Information System for Science and Technology (NISSAT) and International System for Agricultural Science and Technology (AGRIS). The book is intended for the undergraduate and postgraduate students of library science. Besides, it will also be very useful for librarians, information scientists, and information professionals. Salient Features Deals with both theoretical and practical aspects of information sources and services. Discusses various types of information sources and services keeping in view the latest trends and developments in the field. Presents the concepts related to information sources and services in a systematic and accessible way.
Publisher: PHI Learning Pvt. Ltd.
ISBN: 8120346394
Category : Language Arts & Disciplines
Languages : en
Pages : 532
Book Description
Reference and information services are considered an important activity of a modern library. This comprehensive and student-friendly book discusses in detail different types of information and reference sources and services, such as encyclopaedias, directories, yearbooks, dictionaries, geographical sources, biographical sources, statistical sources and handbooks. The book is organised into four parts. Part I deals with various types of information sources such as documentary and non-documentary sources. Part II discusses different types of reference services, organisation of reference section and the role of the librarian in the digital age. Part III describes the wide range of information service such as Current Awareness Service (CAS) and Selective Dissemination of Information (SDI). Part IV provides an overview of important information systems such as National Information System for Science and Technology (NISSAT) and International System for Agricultural Science and Technology (AGRIS). The book is intended for the undergraduate and postgraduate students of library science. Besides, it will also be very useful for librarians, information scientists, and information professionals. Salient Features Deals with both theoretical and practical aspects of information sources and services. Discusses various types of information sources and services keeping in view the latest trends and developments in the field. Presents the concepts related to information sources and services in a systematic and accessible way.