Author: Grazia Lamanna Publisher: Springer Nature ISBN: 3030333388 Category : Technology & Engineering Languages : en Pages : 311
Book Description
This book provides a selection of contributions to the DIPSI workshop 2019 (Droplet Impact Phenomena & Spray Investigations) as well as recent progress of the Int. Research Training Group “DROPIT”.The DIPSI workshop, which is now at its thirteenth edition, represents an important opportunity to share recent knowledge on droplets and sprays in a variety of research fields and industrial applications. The research training group “DROPIT” is focused on droplet interaction technologies where microscopic effects influence strongly macroscopic behavior. This requires the inclusion of interface kinetics and/or a detailed analysis of surface microstructures. Normally, complicated technical processes cover the underlying basic mechanisms, and therefore, progress in the overall process modelling can hardly be gained. Therefore, DROPIT focuses on the underlying basic processes. This is done by investigating different spatial and/or temporal scales of the problems and by linking them through a multi-scale approach. In addition, multi-physics are required to understand e.g. problems for droplet-wall interactions, where porous structures are involved.
Author: Sergei Sazhin Publisher: Springer ISBN: 1447163869 Category : Technology & Engineering Languages : en Pages : 345
Book Description
Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Including case studies that illustrate the approaches relevance to automotive applications, it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.
Author: W. A. Sirignano Publisher: Cambridge University Press ISBN: 0521884896 Category : Science Languages : en Pages : 481
Book Description
This book discusses the theoretical foundations of spray and droplet applications relevant to the technology for active control of sprays applied to new products and applications, improved product performance, cost reductions, and improved environmental outcomes. It also covers theory related to power and propulsion; materials processing and manufacturing technologies including droplet-based net form processing, coating, and painting; medication; pesticides and insecticides; and other consumer uses.
Author: Udo Fritsching Publisher: Springer ISBN: 3319323709 Category : Technology & Engineering Languages : en Pages : 1035
Book Description
This book describes the latest research on producing functional particles using spray processes. The authors detail micro level elementary processes and phase boundaries, process analysis scaling and modeling, and macro level process functions and particle properties. They include numerical simulations and particulars of experiments for deriving process conditions for particle production.
Author: Arnold Frohn Publisher: Springer Science & Business Media ISBN: 3662040409 Category : Technology & Engineering Languages : en Pages : 298
Book Description
The book deals with the dynamical behaviour of single droplets and regular droplet systems. It has been written mainly for experimental researchers. After a short description of the theoretical background, the different experimental facilities and methods necessary for the investigation of single droplets are described in detail. A summary of important applications is included.
Author: Sergei S. Sazhin Publisher: Springer Nature ISBN: 3030997464 Category : Technology & Engineering Languages : en Pages : 603
Book Description
This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.
Author: Hani Henein Publisher: Springer ISBN: 3319526898 Category : Technology & Engineering Languages : en Pages : 567
Book Description
This book describes and illustrates metal spray and spray deposition from the process engineering, metallurgical, and application viewpoints. The authors include step-by-step fundamental information for the metal spray process and detail current engineering developments and applications. They offer industry insight on non-equilibrium solidification processes for yielding stable metal structures and properties.
Author: Publisher: Academic Press ISBN: 9780080575827 Category : Technology & Engineering Languages : en Pages : 433
Book Description
Materials processing and manufacturing are fields of growing importance whereby transport phenomena play a central role in many of the applications. This volume is one of the first collections of contributions on thesubject. The five papers cover a wide variety of applications
Author: Efstathios Michaelides Publisher: CRC Press ISBN: 1498701019 Category : Science Languages : en Pages : 1421
Book Description
The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Author: Publisher: Academic Press ISBN: 0128013540 Category : Technology & Engineering Languages : en Pages : 388
Book Description
Focusing Mesoscales of Multiscale Problems in Chemical Engineering, a volume in the Advances in Chemical Engineering series provides readers with the personal views of recognized authorities who present assessments of the state-of-the-art in the field and help readers develop an understanding of its further evolution. Subjects covered in the book are not limited to the classical chemical engineering disciplines. Contributions connecting chemical engineering to related scientific fields, either providing a fundamental basis or introducing new concepts and tools, are encouraged. This volume aims to create a balance between well developed areas such as process industry, transformation of materials, energy, and environmental issues, and areas where applications of chemical engineering are more recent or emerging. Contains reviews by leading authorities in their respective areas Provides up-to-date reviews of the latest techniques in the modeling of catalytic processes Includes a broad mix of US and European authors, as well as academic/industrial/research institute perspectives Provides discussions on the connections between computation and experimental methods
Author: Grazia Lamanna
Author: Sergei Sazhin
Author: W. A. Sirignano
Author: Udo Fritsching
Author: Arnold Frohn
Author: Sergei S. Sazhin
Author: Hani Henein
Author: 
Author: Efstathios Michaelides
Author: