Author: Sanjaya Kumar Publisher: Springer Science & Business Media ISBN: 1461312930 Category : Computers Languages : en Pages : 288
Book Description
Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
Author: Sanjaya Kumar Publisher: Springer ISBN: 9780792396369 Category : Computers Languages : en Pages : 0
Book Description
Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
Author: Jean-Michel Bergé Publisher: Springer Science & Business Media ISBN: 146131349X Category : Computers Languages : en Pages : 161
Book Description
Object-oriented techniques and languages have been proven to significantly increase engineering efficiency in software development. Many benefits are expected from their introduction into electronic modeling. Among them are better support for model reusability and flexibility, more efficient system modeling, and more possibilities in design space exploration and prototyping. Object-Oriented Modeling explores the latest techniques in object-oriented methods, formalisms and hardware description language extensions. The seven chapters comprising this book provide an overview of the latest object-oriented techniques for designing systems and hardware. Many examples are given in C++, VHDL and real-time programming languages. Object-Oriented Modeling describes further the use of object-oriented techniques in applications such as embedded systems, telecommunications and real-time systems, using the very latest techniques in object-oriented modeling. It is an essential guide to researchers, practitioners and students involved in software, hardware and system design.
Author: Patrick R. Schaumont Publisher: Springer Science & Business Media ISBN: 1461437377 Category : Technology & Engineering Languages : en Pages : 492
Book Description
This textbook serves as an introduction to the subject of embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency? The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions. Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which will make the material in this book applicable to a greater number of courses where these tools are already in use. More examples and exercises have been added throughout the book. “If I were teaching a course on this subject, I would use this as a resource and text. If I were a student who wanted to learn codesign, I would look for a course that at least used a similar approach. If I were an engineer or engineering manager who wanted to learn more about codesign from a very practical perspective, I would read this book first before any other. When I first started learning about codesign as a practitioner, a book like this would have been the perfect introduction.” --Grant Martin, Tensilica--
Author: F. Balarin Publisher: Springer Science & Business Media ISBN: 1461561272 Category : Technology & Engineering Languages : en Pages : 311
Book Description
Embedded systems are informally defined as a collection of programmable parts surrounded by ASICs and other standard components, that interact continuously with an environment through sensors and actuators. The programmable parts include micro-controllers and Digital Signal Processors (DSPs). Embedded systems are often used in life-critical situations, where reliability and safety are more important criteria than performance. Today, embedded systems are designed with an ad hoc approach that is heavily based on earlier experience with similar products and on manual design. Use of higher-level languages such as C helps structure the design somewhat, but with increasing complexity it is not sufficient. Formal verification and automatic synthesis of implementations are the surest ways to guarantee safety. Thus, the POLIS system which is a co-design environment for embedded systems is based on a formal model of computation. POLIS was initiated in 1988 as a research project at the University of California at Berkeley and, over the years, grew into a full design methodology with a software system supporting it. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach is intended to give a complete overview of the POLIS system including its formal and algorithmic aspects. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach will be of interest to embedded system designers (automotive electronics, consumer electronics and telecommunications), micro-controller designers, CAD developers and students.
Author: Hessam S. Sarjoughian Publisher: Springer Science & Business Media ISBN: 1475735545 Category : Computers Languages : en Pages : 420
Book Description
During the 1990s the computing industry has witnessed many advances in mobile and enterprise computing. Many of these advances have been made possible by developments in the areas such as modeling, simulation, and artificial intelligence. Within the different areas of enterprise computing - such as manufacturing, health organisation, and commerce - the need for a disciplined, multifaceted, and unified approach to modeling and simulation has become essential. This new book provides a forum for scientists, academics, and professionals to present their latest research findings from the various fields: artificial intelligence, collaborative/distributed computing, modeling, and simulation.
Author: Jean-Michel Bergé Publisher: Springer Science & Business Media ISBN: 1475726295 Category : Technology & Engineering Languages : en Pages : 178
Book Description
Co-Design is the set of emerging techniques which allows for the simultaneous design of Hardware and Software. In many cases where the application is very demanding in terms of various performances (time, surface, power consumption), trade-offs between dedicated hardware and dedicated software are becoming increasingly difficult to decide upon in the early stages of a design. Verification techniques - such as simulation or proof techniques - that have proven necessary in the hardware design must be dramatically adapted to the simultaneous verification of Software and Hardware. Describing the latest tools available for both Co-Design and Co-Verification of systems, Hardware/Software Co-Design and Co-Verification offers a complete look at this evolving set of procedures for CAD environments. The book considers all trade-offs that have to be made when co-designing a system. Several models are presented for determining the optimum solution to any co-design problem, including partitioning, architecture synthesis and code generation. When deciding on trade-offs, one of the main factors to be considered is the flow of communication, especially to and from the outside world. This involves the modeling of communication protocols. An approach to the synthesis of interface circuits in the context of co-design is presented. Other chapters present a co-design oriented flexible component data-base and retrieval methods; a case study of an ethernet bridge, designed using LOTOS and co-design methodologies and finally a programmable user interface based on monitors. Hardware/Software Co-Design and Co-Verification will help designers and researchers to understand these latest techniques in system design and as such will be of interest to all involved in embedded system design.
Author: Dietmar P.F. Möller Publisher: Springer ISBN: 3319251783 Category : Computers Languages : en Pages : 422
Book Description
This book presents an in-depth review of the state of the art of cyber-physical systems (CPS) and their applications. Relevant case studies are also provided, to help the reader to master the interdisciplinary material. Features: includes self-test exercises in each chapter, together with a glossary; offers a variety of teaching support materials at an associated website, including a comprehensive set of slides and lecture videos; presents a brief overview of the study of systems, and embedded computing systems, before defining CPS; introduces the concepts of the Internet of Things, and ubiquitous (or pervasive) computing; reviews the design challenges of CPS, and their impact on systems and software engineering; describes the ideas behind Industry 4.0 and the revolutions in digital manufacturing, including smart and agile manufacturing, as well as cybersecurity in manufacturing; considers the social impact of the changes in skills required by the globalized, digital work environment of the future.
Author: Sanjaya Kumar
Author: Sanjaya Kumar
Author: Sanjaya Kumar
Author: Sanjaya Kumar
Author: Jean-Michel Bergé
Author: Patrick R. Schaumont
Author: F. Balarin
Author: Hessam S. Sarjoughian
Author: Jean-Michel Bergé
Author: Dietmar P.F. Möller