Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download FIDIC Red, Yellow and Silver Book PDF full book. Access full book title FIDIC Red, Yellow and Silver Book by Leo Grutters. Download full books in PDF and EPUB format.
Author: Leo Grutters Publisher: ISBN: 9780414058453 Category : Languages : en Pages : 480
Book Description
FIDIC 2nd Edition Red, Yellow and Silver books provides a unique drafter's-perspective clause-by-clause analysis of the 2016 editions of the FIDIC contracts. Readers will understand how each sub-clause is interlinked and how to minimise and avoid future disputes through the accurate interpretation of clauses.
Author: Leo Grutters Publisher: ISBN: 9780414058453 Category : Languages : en Pages : 480
Book Description
FIDIC 2nd Edition Red, Yellow and Silver books provides a unique drafter's-perspective clause-by-clause analysis of the 2016 editions of the FIDIC contracts. Readers will understand how each sub-clause is interlinked and how to minimise and avoid future disputes through the accurate interpretation of clauses.
Author: William Godwin Publisher: John Wiley & Sons ISBN: 1119514657 Category : Law Languages : en Pages : 264
Book Description
Provides a clear and comprehensive guide to the 2017 FIDIC contracts—written by a member of the FIDIC Updates Task Group FIDIC contracts are the most widely used engineering standard form contracts internationally but until 2017 the three main forms (the Red, Yellow and Silver Books) had not been amended or updated for nearly two decades, since the first editions were published in 1999. Written by a specialist lawyer who was member of the FIDIC Updates Task Group responsible for writing the new contracts, this book examines in detail the many substantial changes they have introduced. After providing an overview the contracts are examined clause by clause with the aim of showing how each compares and contrasts with the others and how the second editions compare and contrast with the first. The first chapter describes how the Red, Yellow and Silver Books evolved from earlier contract forms and the distinctive characteristics of each, before providing an overview of the updates, including new potential risks for both Employer and Contractor, and then examining, in the second chapter, key general provisions such as the new rules on notices and limitation of liability. Chapter 3 examines the enhanced role of the Engineer in the Red and Yellow Books/Employer’s Representative’s function in the Silver including the new procedure for determinations as well as the Employer’s obligations and contract administration. The Contractor’s obligations are considered in chapter 4 while chapter 5 examines his responsibility for design in the Yellow and Silver Books. Chapters 6 to 14 deal respectively with plant, materials and workmanship and staff and labour; time-related provisions in the three contracts including extensions of time, and the Employer’s right to suspend the works; testing on and after completion and the Employer’s taking over of the works; defects after taking over, acceptance of the works and unfulfilled obligations; measurement (in the Red Book), the Contract Price and payment; the new variations regime and adjustments to the Price; termination and suspension; care of the works and indemnities and Exceptional Events (previously, Force Majeure). An important feature of the new contracts is their increased emphasis on clarity in the claims process and on dispute avoidance. These topics are examined in the final two chapters, 15 and 16, which deal respectively with the new claims and dispute resolution provisions of the 2017 forms. FIDIC contracts are the most widely used standard forms of contract for international engineering and construction projects Provides a clear and comprehensive guide to the 2017 FIDIC Red, Yellow and Silver Books Written by a senior specialist lawyer and member of the FIDIC 2017 Updates Task Group responsible for writing the new contracts Accessible to those with little or no familiarity with FIDIC contracts The 2017 FIDIC Contracts is an important guide for anyone engaged in international projects, including employers, contractors, engineers, lawyers, suppliers and project financiers/sponsors.
Author: Nael G. Bunni Publisher: John Wiley & Sons ISBN: 1118658655 Category : Law Languages : en Pages : 731
Book Description
In September 1999, FIDIC introduced its new Suite of Contracts, which included a “new” Red, Yellow, Silver and Green forms of contract. The “new” Red Book was intended to replace the 1992 fourth edition of the Red Book, with the ambition that its use would cease with time. This ambition has not materialised and is unlikely to do so in the future. Despite the importance of the 1999 Forms, there has been very little published on the new concepts adopted in them and how they interact with the previous forms. This important work considers these aspects together with the many developments affecting the fourth edition of the Red Book that have taken place since 1997, when the second edition of this book was published, and relates them to key contracting issues. It is written by a chartered engineer, conciliator and international arbitrator with wide experience in the use of the FIDIC Forms and in the various dispute resolution mechanisms specified in them. Important features of this book include: · background and concepts of the various forms of contract; · a detailed comparison of the wording of the1999 three main forms, which although similar in nature; it nevertheless significantly differs in certain areas where the three forms diverge due to their intended purpose; · analysis of the rights and obligations of the parties involved in the contract and the allocation of risks concerned; · a range of ‘decision tree’ charts, analysing the main features of the 1992 Red Book, including risks, indemnities and insurances, claims and counterclaims, variations, procedure for claims, programme and delay, suspension, payments and certificates, dispute resolution mechanisms, and dispute boards; · a much enlarged discussion of the meaning of “claim” and “dispute” and the types of claim with a discussion of the Notice provision in the 1999 forms of contract for the submittal of claims by a contractor and by an employer; · the FIDIC scheme of indemnities and insurance requirements; and the methods of dispute resolution provided by the various forms of contract; and · five new chapters in this third edition, the first four chapters deal with each of the 1999 forms and the fifth chapter is confined to the topic of Dispute Boards.
Author: Fédération internationale des ingénieurs-conseils Publisher: ISBN: 9782884320108 Category : Construction contracts Languages : en Pages : 75
Book Description
The terms of the Conditions of Contract for Design - Build and Turnkey have been prepared by the Federation Internationale des Ingenieurs Conseils (FIDIC) and are recommended for general use for the purpose of the design and construction of works where tenders are invited on an international basis; with minor modifications, the Conditions are also suitable for use on domestic contracts.
Author: Kelvin Hughes Publisher: Routledge ISBN: 100029725X Category : Law Languages : en Pages : 329
Book Description
Understanding FIDIC explains in simple and practical terms what is often seen as a very complex range of international engineering and construction contracts. Covering the FIDIC 2017 Red, Yellow and Silver Books (referred to as "The Rainbow Suite"), the book gives an overview of all three contracts, including coverage of changes between the 1999 contracts and the present 2017 suite. FIDIC contracts are widely used as far afield as Europe, the Middle East, Asia and Australia, and this book provides a practical yet thorough guide to the key elements that practitioners preparing and administering these contracts would need to be aware of. In his approachable and readable style, Kelvin Hughes covers: The obligations and responsibilities of the Employer, the Employer’s Representative, the Engineer and the Contractor Quality and Defects Liability Design Responsibility and Liability Variations, Measurement and Payment Procedures Progress, Delays, Extensions of Time and Completion Suspension and Termination Insurances Employer’s and Contractor’s Claims The Dispute Avoidance/Adjudication Board and the Resolution of Disputes Tendering Anyone working with FIDIC contracts whether as the Employer, Employer’s Representative, Engineer or Contractor will benefit greatly from this easy-to-read guide to the Rainbow Suite. Students on professional courses or researching the contracts for project work will also find this book extremely useful.
Author: Axel-Volkmar Jaeger Publisher: Springer Science & Business Media ISBN: 364202100X Category : Law Languages : en Pages : 446
Book Description
In 1999, a suite of three new conditions of contract was published by FIDIC, following the basic structure and wording harmonised and updated around the previous FIDIC Design-Build and Turnkey Contract (the 1992 ‘‘Orange Book’’). These conditions, known as the ‘‘FIDIC rainbow, were the Conditions of C- tract for: l Construction, the so-called Red Book, for works designed by the Employer l Plant and Design-Build, the so-called Yellow Book, for works designed by the Contractor l EPC/Turnkey Projects, the so-called Silver Book, for works designed by the Contractor The ?rst is intended for construction works where the Employer is responsible for the design, as for per the previous so-called Red Book 4th Edition (1987), with an important role for the Engineer. The other two conditions of contract are intended for situations when the Contractor is responsible for the design. The Plant and Design-Build Contract has the traditional Engineer while the EPC/Turnkey Contract has a two-party arran- ment, generally with an Employer’s Representative as one of the parties.
Author: Andy Hewitt Publisher: John Wiley & Sons ISBN: 1119151880 Category : Law Languages : en Pages : 216
Book Description
A practical, step-by-step guide on how to prepare and respond to construction claims. Everyone involved in the preparation or review of construction claims should have this book to hand. The book examines the different types of claim common to construction contracts and presents a step-by-step guide to demonstrate the process of building up a fully detailed claim submission. It includes advice on: Contract administration for claims and claims avoidance. Identifying the various types of claim. The key points for an effective claim or response document. The essential elements to be included in a claim or response. Extension of time claims. Claims for additional payment. Principles of delay analysis. Quantum calculations. Responses and determinations to achieve agreement and avoid disputes. A note on dispute boards. The advice given in the book is supported by worked examples of typical claims and responses with sample wording. The book includes a foreword by Roger Knowles, who has this to say: “The book is without a doubt fully comprehensive and goes though the preparation of a claim from A to Z. I have no hesitation in recommending it to students, beginners, those involved on a day-to-day basis with time and cost on projects, as well as the seasoned claims consultants”. This book is suitable for contracts managers, commercial managers, project managers, quantity surveyors, engineers and architects. A practical, step-by-step guide on how to prepare and respond to construction claims. Everyone involved in the preparation or review of construction claims should have this book to hand. The book examines the different types of claim common to construction contracts and presents a step-by-step guide to demonstrate the process of building up a fully detailed claim submission. It includes advice on: Contract administration for claims and claims avoidance. Identifying the various types of claim. The key points for an
Author: Michael D. Robinson Publisher: John Wiley & Sons ISBN: 1118385608 Category : Law Languages : en Pages : 229
Book Description
When all parties involved in the construction process fully understand their roles and are able to anticipate potential points of conflict, disputes and delays will be minimised. The Employer’s and Engineer’s Guide to the FIDIC Conditions of Contract sets out the essential administrative requirements of a FIDIC based contract by reference to the FIDIC 1999 Red Book. The obligations and duties of the Employer and the Engineer are identified and discussed. Potential pitfalls are highlighted and likely consequences pointed out. The importance of the Employer’s role in the preparation of tenders, which fully reflect his requirements and duties and obligations arising in the execution of the works, is emphasised. The key role of the Engineer in the effective administration of contracts after award is examined and commentary provided. Included in the guide are a number of appendices, including model letters which will be of value to less experienced staff (particularly those whose mother-tongue is not the English language). Engineers, quantity surveyors and project managers engaged in the contractual administration of international projects using FIDIC forms of contract will find the concise guidance in simple and jargon-free language provided here invaluable. This, together with the author’s earlier book, Contractor’s Guide to the FIDIC Conditions of Contract - which describes the duties, rights and responsibilities of the Contractor – represents the totality of supervision, design and execution of construction projects executed under the FIDIC Conditions of Contract. This book’s companion website offers invaluable resources to freely download, adapt and use: Model letters for use by the Employer Model letters for use by the Contractor Sample Interim Payment Certificate Model Form for Submissions to the Engineer Model Form of Engineer’s Order for Varied Works Model Form of Daywork/Daily Record Sheets
Author: Leo Grutters
Author: Leo Grutters
Author: William Godwin
Author: Jakob B. Sørensen
Author: Nael G. Bunni
Author: International Federation of Consulting Engineers
Author: Fédération internationale des ingénieurs-conseils
Author: Kelvin Hughes
Author: Axel-Volkmar Jaeger
Author: Andy Hewitt
Author: Michael D. Robinson