Author: Ronald W. Armstrong
Publisher: MDPI
ISBN: 3038429678
Category : Electronic books
Languages : en
Pages : 335
Book Description
This book is a printed edition of the Special Issue "Crystal Indentation Hardness" that was published in Crystals
Crystal Indentation Hardness
Author: Ronald W. Armstrong
Publisher: MDPI
ISBN: 3038429678
Category : Electronic books
Languages : en
Pages : 335
Book Description
This book is a printed edition of the Special Issue "Crystal Indentation Hardness" that was published in Crystals
Publisher: MDPI
ISBN: 3038429678
Category : Electronic books
Languages : en
Pages : 335
Book Description
This book is a printed edition of the Special Issue "Crystal Indentation Hardness" that was published in Crystals
Crystal Indentation Hardness
Author: Wayne Elban
Publisher:
ISBN: 9783038429685
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN: 9783038429685
Category :
Languages : en
Pages :
Book Description
Crystal Indentation Hardness
Author: Ronald W. Armstrong (Ed.)
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Ore Microscopy
Author: James R. Craig
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 440
Book Description
Provides an up-to-date introduction to the subject of ore microscopy, emphasizing the basic skills required for the study of opaque minerals in polished sections. Describes the modern ore microscope, the preparation of polished and polished-thin sections of opaque minerals and ores, and the identification of these minerals using both qualitative techniques and the quantitative methods of reflectance and microhardness measurement. Later sections discuss the interpretation of textural intergrowths of ore minerals and the determination of their paragenesis, along with the examination of coexisting minerals for determining their physio-chemical conditions of formation. Appendices contain the data necessary to identify approximately 100 of the more common ore minerals and those frequently encountered by the professional scientist.
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 440
Book Description
Provides an up-to-date introduction to the subject of ore microscopy, emphasizing the basic skills required for the study of opaque minerals in polished sections. Describes the modern ore microscope, the preparation of polished and polished-thin sections of opaque minerals and ores, and the identification of these minerals using both qualitative techniques and the quantitative methods of reflectance and microhardness measurement. Later sections discuss the interpretation of textural intergrowths of ore minerals and the determination of their paragenesis, along with the examination of coexisting minerals for determining their physio-chemical conditions of formation. Appendices contain the data necessary to identify approximately 100 of the more common ore minerals and those frequently encountered by the professional scientist.
Vickers Indentation Hardness of Stoichiometric and Reduced Single Crystal TiO2 (rutile) from 25 to 800 C
Author: Christopher DellaCorte
Publisher:
ISBN:
Category : Ceramics
Languages : en
Pages : 14
Book Description
Publisher:
ISBN:
Category : Ceramics
Languages : en
Pages : 14
Book Description
Crystal Plasticity Finite Element Methods
Author: Franz Roters
Publisher: John Wiley & Sons
ISBN: 3527642099
Category : Technology & Engineering
Languages : en
Pages : 188
Book Description
Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Publisher: John Wiley & Sons
ISBN: 3527642099
Category : Technology & Engineering
Languages : en
Pages : 188
Book Description
Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Ceramic Hardness
Author: I.J. McColm
Publisher: Springer Science & Business Media
ISBN: 1475747322
Category : Technology & Engineering
Languages : en
Pages : 331
Book Description
As the utilization of ceramic materials is developing at a great pace, so too is the science of ceramics improving the understanding we have about these high-technology materials. New and improved ways of examining and investigating monolithic ceramics and ceramic composites are also being developed and reported at a great pace in a wide-ranging area of the scientific and technical literature. This book has been written with the aim of increas ing the awareness of the general materials worker of developments in modern ceramics and of bringing to a focus how much the study of their hardness can contribute to our understanding of them and lead to technical data that can be of considerable use in this fast-growing field. The readership will consist of materials scientists, metallurgists, and engineers moving into the new worlds of advanced ceramics and ceramic-containing composites. Detailed works on hardness are to be found in the metallurgical area, where much of the theory and early applications were developed. This book does not overly stress this early development of theory and practice, but concentrates wherever possible on the ceramics and glasses. Thus Chapter 1 introduces the general subject area to those whose interest may have been blunted in the past by the emphasis on one area of materials. Subjects raised in the first chapter are developed more fully in later chapters.
Publisher: Springer Science & Business Media
ISBN: 1475747322
Category : Technology & Engineering
Languages : en
Pages : 331
Book Description
As the utilization of ceramic materials is developing at a great pace, so too is the science of ceramics improving the understanding we have about these high-technology materials. New and improved ways of examining and investigating monolithic ceramics and ceramic composites are also being developed and reported at a great pace in a wide-ranging area of the scientific and technical literature. This book has been written with the aim of increas ing the awareness of the general materials worker of developments in modern ceramics and of bringing to a focus how much the study of their hardness can contribute to our understanding of them and lead to technical data that can be of considerable use in this fast-growing field. The readership will consist of materials scientists, metallurgists, and engineers moving into the new worlds of advanced ceramics and ceramic-containing composites. Detailed works on hardness are to be found in the metallurgical area, where much of the theory and early applications were developed. This book does not overly stress this early development of theory and practice, but concentrates wherever possible on the ceramics and glasses. Thus Chapter 1 introduces the general subject area to those whose interest may have been blunted in the past by the emphasis on one area of materials. Subjects raised in the first chapter are developed more fully in later chapters.
Nanoindentation
Author: Anthony C. Fischer-Cripps
Publisher: Springer Science & Business Media
ISBN: 1475759436
Category : Technology & Engineering
Languages : en
Pages : 283
Book Description
This new edition of Nanoindentation includes a dedicated chapter on thin films, new material on dynamic analysis and creep, accounts of recent research, and three new appendices on nonlinear least squares fitting, frequently asked questions, and specifications for a nanoindentation instrument. Nanoindentation Second Edition is intended for those who are entering the field for the first time and to act as a reference for those already conversant with the technique.
Publisher: Springer Science & Business Media
ISBN: 1475759436
Category : Technology & Engineering
Languages : en
Pages : 283
Book Description
This new edition of Nanoindentation includes a dedicated chapter on thin films, new material on dynamic analysis and creep, accounts of recent research, and three new appendices on nonlinear least squares fitting, frequently asked questions, and specifications for a nanoindentation instrument. Nanoindentation Second Edition is intended for those who are entering the field for the first time and to act as a reference for those already conversant with the technique.
Testing of the Plastic Deformation of Metals
Author: T. W. Clyne
Publisher: Cambridge University Press
ISBN: 1108837891
Category : Science
Languages : en
Pages : 297
Book Description
Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Publisher: Cambridge University Press
ISBN: 1108837891
Category : Science
Languages : en
Pages : 297
Book Description
Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Plasticity and Fracture
Author: Wolfgang Brocks
Publisher: Springer
ISBN: 331962752X
Category : Science
Languages : en
Pages : 173
Book Description
This book is based on 40 years of research and teaching in the fields of fracture mechanics and plasticity. It will bring students and engineers from various disciplines up to date on key concepts that have become increasingly important in the design of safety-relevant engineering structures in general and in modern lightweight structures in the transportation industry in particular. Primarily intended for graduate students in the engineering sciences and practicing structural engineers, it employs a multidisciplinary approach that comprises theoretical concepts, numerical methods, and experimental techniques. In addition, it includes a wealth of analytical and numerical examples, used to illustrate the applications of the concepts discussed.
Publisher: Springer
ISBN: 331962752X
Category : Science
Languages : en
Pages : 173
Book Description
This book is based on 40 years of research and teaching in the fields of fracture mechanics and plasticity. It will bring students and engineers from various disciplines up to date on key concepts that have become increasingly important in the design of safety-relevant engineering structures in general and in modern lightweight structures in the transportation industry in particular. Primarily intended for graduate students in the engineering sciences and practicing structural engineers, it employs a multidisciplinary approach that comprises theoretical concepts, numerical methods, and experimental techniques. In addition, it includes a wealth of analytical and numerical examples, used to illustrate the applications of the concepts discussed.