Author: Publisher:
ISBN:
Category : Pipelines
Languages : en
Pages :
Book Description
Design and Operation of Pipeline Control Systems
Author: Design and Operation of Pipeline Control Systems
Author: Louis FletcherPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 76
Book Description
This collection contains six papers covering practical aspects of the control systems in pipeline projects presented at a session of the ASCE National Convention, held in San Francisco, California, October 5, 1984.
Pipeline System Automation and Control
Author: Mike YoonPublisher: American Society of Mechanical Engineers
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 504
Book Description
Discusses the methods for monitoring and controlling a pipeline system safely and efficiently. This book reviews the various automation technologies and discusses the design, implementation and operation of pipeline automation, with emphasis on centralized automation systems.
Hearings, Reports and Prints of the House Committee on Interstate and Foreign Commerce
Author: United States. Congress. House. Committee on Interstate and Foreign CommercePublisher:
ISBN:
Category : Interstate commerce
Languages : en
Pages : 1456
Book Description
Hearings
Author: United States. Congress. House. Committee on Interstate and Foreign CommercePublisher:
ISBN:
Category :
Languages : en
Pages : 1458
Book Description
Safe Design and Operation of Process Vents and Emission Control Systems
Author: CCPS (Center for Chemical Process Safety)Publisher: John Wiley & Sons
ISBN: 0470038063
Category : Technology & Engineering
Languages : en
Pages : 345
Book Description
Process vent header collection systems are subject to continually varying compositions and flow rates and thus present significant challenges for safe design. Due to increasingly demanding safety, health, environmental, and property protection requirements, today's industrial designers are faced with the need to create increasingly complex systems for more effective treatment, dispersal, or disposal of process gases. Safe Design and Operation of Process Vents and Emission Control Systems provides cutting-edgeguidance for the design, evaluation, and operation of these systems, with emphasis on: Preventing fires, explosions, and toxic releases Maintaining safe vent conditions Understanding normal process operations, such as intentional routine controlled venting and emergency operations, like overpressure relief Mitigating the impacts of end-of-line treatment devices, such as scrubbers, flares, and thermal oxidizers, on the vent header system Complying with regulations Written by a team of process safety experts from the chemical, pharmaceutical, and petroleum industries, the book includes a wealth of real-world examples and a thorough overview of the tools and methods used in the profession.
Oil and Gas Pipeline Fundamentals
Author: John L. KennedyPublisher: Pennwell Books
ISBN:
Category : Business & Economics
Languages : en
Pages : 388
Book Description
Industry expert John Kennedy details the oil and gas pipeline operation industry in this complete text. Contents: Pipeline industry overview Types of pipelines Pipe manufacture and coating Fundamentals of pipeline design Pumps and compressors Prime movers Construction practices and equipment Welding techniques and equipment Operation and control Metering and storage Maintenance and repair Inspection and rehabilitation Pipeline regulation Safety and environmental protection Tommorrow's technology. (Amazon)
Computer-Aided Control Systems Design
Author: Cheng Siong ChinPublisher: CRC Press
ISBN: 1466568526
Category : Technology & Engineering
Languages : en
Pages : 384
Book Description
Computer-Aided Control Systems Design: Practical Applications Using MATLAB® and Simulink® supplies a solid foundation in applied control to help you bridge the gap between control theory and its real-world applications. Working from basic principles, the book delves into control systems design through the practical examples of the ALSTOM gasifier system in power stations and underwater robotic vehicles in the marine industry. It also shows how powerful software such as MATLAB® and Simulink® can aid in control systems design. Make Control Engineering Come Alive with Computer-Aided Software Emphasizing key aspects of the design process, the book covers the dynamic modeling, control structure design, controller design, implementation, and testing of control systems. It begins with the essential ideas of applied control engineering and a hands-on introduction to MATLAB and Simulink. It then discusses the analysis, model order reduction, and controller design for a power plant and the modeling, simulation, and control of a remotely operated vehicle (ROV) for pipeline tracking. The author explains how to obtain the ROV model and verify it by using computational fluid dynamic software before designing and implementing the control system. In addition, the book details the nonlinear subsystem modeling and linearization of the ROV at vertical plane equilibrium points. Throughout, the author delineates areas for further study. Appendices provide additional information on various simulation models and their results. Learn How to Perform Simulations on Real Industry Systems A step-by-step guide to computer-aided applied control design, this book supplies the knowledge to help you deal with control problems in industry. It is a valuable reference for anyone who wants a better understanding of the theory and practice of basic control systems design, analysis, and implementation.
Fossil Energy Update
Author: Lees' Loss Prevention in the Process Industries
Author: Frank LeesPublisher: Elsevier
ISBN: 0080489338
Category : Technology & Engineering
Languages : en
Pages : 3708
Book Description
Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field