Handbook of Thermodynamic Tables and Diagrams PDF Download

Author: Charles Edward Lucke
Publisher:
ISBN:
Category : Thermodynamics
Languages : en
Pages : 264

View

Book Description

Author: Kuzman Ražnjević
Publisher:
ISBN:
Category : Matériel didactique
Languages : en
Pages : 392

View

Book Description

Author: Charles Edward 1876-1951 Lucke
Publisher: Wentworth Press
ISBN: 9781362678656
Category : History
Languages : en
Pages : 264

View

Book Description
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Author: Charles Edward Lucke
Publisher: Forgotten Books
ISBN: 9781333884604
Category : Technology & Engineering
Languages : en
Pages : 262

View

Book Description
Excerpt from Handbook of Thermodynamic Tables and Diagrams: A Selection of Tables and Diagrams From Engineering Thermodynamics Time is an important item in all engineering work and none the less so in computations, so that convenient tables and diagrams are most essential to the solution of such problems. In some cases graphic methods are the only means of solution; in others the problems may be solved directly without the use of formulas, and in still others certain steps may be Shortened. In many engineering calculations no one is justified in using a complicated mathematical formula; if too much time be required to make the calculation in commercial work it will not be made, therefore indirect and often approximate methods are substituted. In such cases the nearest tabular or chart value must be used, and generally the result will be as accurate as the work requires. In the following tables and charts the accompanying title usually, indi cates the character of each table or diagram and little explanation is necessary. The tables for dry saturated steam, and properties of superheated steam are those of Marks and Davis. From the investigation made by Marks and Davis it is believed that the properties of saturated steam given in the tables are correct to within one-tenth of 1 per cent. For pressures within the range of ordinary engineering practice. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Author: k Raznjevic'
Publisher: Begell House Publishers
ISBN: 9781567000467
Category : Science
Languages : en
Pages : 247

View

Book Description
An important compilation of the thermal properties of selected solids, liquids, vapors, and gases. Covers foods, metals, alloys, building materials, industrial gases, refrigerants, and much more. Includes hard-to-find data on thermal conductivities, specific heat capacities, dynamic viscosity, and properties of compounds.

Author: Marco Satyro
Publisher: Gulf Professional Publishing
ISBN: 0128105178
Category : Science
Languages : en
Pages : 1000

View

Book Description
Petroleum and chemical engineers are constantly looking for reliable data yet don’t have the time to search through multiple sources and articles to get the most accurate pieces of data. The Yaws Handbook of Thermodynamic Properties for Hydrocarbons and Chemicals, 2nd edition brings a one-stop database reference for engineers to quickly gain access on over 12,000 compounds, simple and complex fluids, and an extensive list of properties – all to validate and improve on their thermodynamic modeling. Enhanced with eight new chapters covering more equation of state parameters, Yaws’ product continues to remain a go-to source to crosscheck critical properties available on process simulators or PVT software and estimate these properties based on the group contribution methods described in the different chapters. The Yaws Handbook of Thermodynamic Properties for Hydrocarbons and Chemicals, 2nd edition stands as the trusted database to optimize petrochemical processes, equipment, and operations. Provides a reliable database reference for thermodynamic properties, even varied by temperature, as well as simple and complex fluids, mixtures, and property calculations Updated with eight additional new chapters covering a modern platform of practical applications in modelling both pure fluids and mixtures with cubic equations of state Delivers accurate and quick options and solutions to size or simulate petrochemical processes and develop better predictive models

Author: Charles Edward Lucke
Publisher:
ISBN: 9781017701340
Category : History
Languages : en
Pages : 0

View

Book Description

Author: K. Raznjevic
Publisher: Taylor & Francis Group
ISBN:
Category : Thermodynamics
Languages : en
Pages : 412

View

Book Description
"This volume provides comprehensive treatment of basic data for engineering thermodynamics as well as practical and theoretical thermodynamics ... All numerical values are cited in both technical and SI units ... Contents are arranged according to aggregate states: solids, liquids, vapors, and gases. And at the end of the book is a table converting units of measure ... from one system to another."--Pref. Information on thermal properties, melting points, specific heat, thermal conductivity etc.. Twenty-one pages of conversion factors and equivalents. Two large charts in inside back cover on water-enthalpy/vs. entropy. Indexed. Published 1976.

Author: Charles Edward Lucke
Publisher: CreateSpace
ISBN: 9781499758450
Category : Reference
Languages : en
Pages : 254

View

Book Description
An excerpt from the beginning of PART I - INTRODUCTION: THE province of Engineering Thermodynamics is to guide numerical thermal computations dealing with actual substances and apparatus in accordance with the laws of thermodynamic philosophy. In order to do this, numerical values for heat effects must be available for the various substances and materials used in engineering under the varying conditions of practice, and in such units as may readily be applied; these include especially that class of units known as physical constants which embrace, for example, such quantities as the coefficients of expansion, the specific heats, latent heats of fusion and vaporization, the ratio of the pressure-volume product to absolute temperature, the exponent "s" in adiabatic expansion of gases and vapors, and various other quantities. In addition to the physical constants which are necessary in the work of thermodynamic computation, the solution of numerical problems is greatly facilitated by the use of other correlated tables and diagrams many of which are given in the present book of tables, but to correctly use such aids there should be no ambiguity in regard to the units employed. It should be noted that true pressures are always absolute, that is, measured above a perfect vacuum or counted from zero, while most pressure gages and other devices for measuring pressure, such as indicators, give results measured above or below atmospheric pressure. In all problems involving work of gases and vapors, the absolute values of the pressures must be used; hence, if a gage or indicator measurement is being considered, the pressure of the atmosphere found by means of the barometer must be added to the pressure above atmosphere in order to obtain the absolute or true pressures. When the pressures are below atmosphere the combination with the barometric reading will depend on the record; if the record be taken by an indicator it will be in pounds per square inch below atmosphere and must be subtracted from the barometric equivalent in the same units to give the absolute pressure in pounds per square inch. When, however, a vacuum gage reads in inches of mercury below atmosphere, as such gages do, the difference between its reading and the barometric gives the absolute pressure in inches of mercury directly, which can be converted to the desired units by the proper factors. In general, steam pressures are most commonly stated in pounds per square inch and are designated as either gage or absolute. Pressures of compressed air are commonly expressed in the same units as steam, either gage or absolute, though sometimes in atmospheres. Steam pressures below atmosphere are conveniently stated as a vacuum of so many inches of mercury, or they may be given as a pressure of so many inches of mercury absolute or so many pounds per square inch absolute. The pressures of gases stored in tanks under high pressure are frequently recorded in atmospheres due to the convenience of computation of quantities on this basis. Pressures of air obtained by blowers or fans are sometimes given in ounces per square inch above atmosphere, but such pressures, and also differences of pressure of air due to chimney draught, or forced draught, and the pressure of illuminating gas in city mains are commonly stated in inches of water. In many cases the data are given in other units which must be converted by the use of tables, diagrams or otherwise, before the results can be properly interpreted or intelligently compared. Time is an important item in all engineering work and none the less so in computations, so that convenient tables and diagrams are most essential to the solution of such problems....

Author: Carl L. Yaws
Publisher: Gulf Professional Publishing
ISBN:
Category : Science
Languages : en
Pages : 378

View

Book Description
Thermodynamic property data are important in many engineering applications in the chemical processing and petroleum refining industries.