Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains PDF full book. Access full book title Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains by J. George Shanthikumar. Download full books in PDF and EPUB format.
Author: J. George Shanthikumar Publisher: Springer Science & Business Media ISBN: 1461503736 Category : Business & Economics Languages : en Pages : 413
Book Description
This volume originates from two workshops, both focusing on themes that are reflected in the title of the volume. The first workshop took place at Eindhoven University of Technology, April 24-26, 2001, on the occasion of the University granting a doctorate honoris causa to Profes sor John A. Buzacott. The second workshop was held on June 15, 2002 at Cornell University (preceding the annual INFORMSjMSOM Confer ence), honoring John's retirement and his lifetime contributions. Each of the two workshops consisted of about a dozen technical presentations. The objective of the volume, however, is not to simply publish the proceedings of the two workshops. Rather, our objective is to put to gether a select set of articles, each organized into a well-written chapter, focusing on a timely topic. Collected into a single volume, these chapters aim to serve as a useful reference for researchers and practitioners alike, and also as reading materials for graduate courses or seminars.
Author: J. George Shanthikumar Publisher: Springer Science & Business Media ISBN: 1461503736 Category : Business & Economics Languages : en Pages : 413
Book Description
This volume originates from two workshops, both focusing on themes that are reflected in the title of the volume. The first workshop took place at Eindhoven University of Technology, April 24-26, 2001, on the occasion of the University granting a doctorate honoris causa to Profes sor John A. Buzacott. The second workshop was held on June 15, 2002 at Cornell University (preceding the annual INFORMSjMSOM Confer ence), honoring John's retirement and his lifetime contributions. Each of the two workshops consisted of about a dozen technical presentations. The objective of the volume, however, is not to simply publish the proceedings of the two workshops. Rather, our objective is to put to gether a select set of articles, each organized into a well-written chapter, focusing on a timely topic. Collected into a single volume, these chapters aim to serve as a useful reference for researchers and practitioners alike, and also as reading materials for graduate courses or seminars.
Author: J. MacGregor Smith Publisher: Springer Science & Business Media ISBN: 1461467772 Category : Business & Economics Languages : en Pages : 397
Book Description
This handbook surveys important stochastic problems and models in manufacturing system operations and their stochastic analysis. Using analytical models to design and control manufacturing systems and their operations entail critical stochastic performance analysis as well as integrated optimization models of these systems. Topics deal with the areas of facilities planning, transportation, and material handling systems, logistics and supply chain management, and integrated productivity and quality models covering: • Stochastic modeling and analysis of manufacturing systems • Design, analysis, and optimization of manufacturing systems • Facilities planning, transportation, and material handling systems analysis • Production planning, scheduling systems, management, and control • Analytical approaches to logistics and supply chain management • Integrated productivity and quality models, and their analysis • Literature surveys of issues relevant in manufacturing systems • Case studies of manufacturing system operations and analysis Today’s manufacturing system operations are becoming increasingly complex. Advanced knowledge of best practices for treating these problems is not always well known. The purpose of the book is to create a foundation for the development of stochastic models and their analysis in manufacturing system operations. Given the handbook nature of the volume, introducing basic principles, concepts, and algorithms for treating these problems and their solutions is the main intent of this handbook. Readers unfamiliar with these research areas will be able to find a research foundation for studying these problems and systems.
Author: David D. Yao Publisher: Springer Science & Business Media ISBN: 0387217576 Category : Business & Economics Languages : en Pages : 472
Book Description
This books covers the broad range of research in stochastic models and optimization. Applications presented include networks, financial engineering, production planning, and supply chain management. Each contribution is aimed at graduate students working in operations research, probability, and statistics.
Author: George Liberopoulos Publisher: Springer Science & Business Media ISBN: 3540290575 Category : Business & Economics Languages : en Pages : 363
Book Description
Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.
Author: David D. Yao Publisher: Springer Science & Business Media ISBN: 1461226708 Category : Business & Economics Languages : en Pages : 369
Book Description
Manufacturing systems have become increasingly complex over recent years. This volume presents a collection of chapters which reflect the recent developments of probabilistic models and methodologies that have either been motivated by manufacturing systems research or been demonstrated to have significant potential in such research. The editor has invited a number of leading experts to present detailed expositions of specific topics. These include: Jackson networks, fluid models, diffusion and strong approximations, the GSMP framework, stochastic convexity and majorization, perturbation analysis, scheduling via Brownian models, and re-entrant lines and dynamic scheduling. Each chapter has been written with graduate students in mind, and several have been used in graduate courses that teach the modeling and analysis of manufacturing systems.
Author: Dong-Ping Song Publisher: Springer Science & Business Media ISBN: 1447147243 Category : Technology & Engineering Languages : en Pages : 282
Book Description
Optimal Control and Optimization of Stochastic Supply Chain Systems examines its subject the context of the presence of a variety of uncertainties. Numerous examples with intuitive illustrations and tables are provided, to demonstrate the structural characteristics of the optimal control policies in various stochastic supply chains and to show how to make use of these characteristics to construct easy-to-operate sub-optimal policies. In Part I, a general introduction to stochastic supply chain systems is provided. Analytical models for various stochastic supply chain systems are formulated and analysed in Part II. In Part III the structural knowledge of the optimal control policies obtained in Part II is utilized to construct easy-to-operate sub-optimal control policies for various stochastic supply chain systems accordingly. Finally, Part IV discusses the optimisation of threshold-type control policies and their robustness. A key feature of the book is its tying together of the complex analytical models produced by the requirements of operational practice, and the simple solutions needed for implementation. The analytical models and theoretical analysis propounded in this monograph will be of benefit to academic researchers and graduate students looking at logistics and supply chain management from standpoints in operations research or industrial, manufacturing, or control engineering. The practical tools and solutions and the qualitative insights into the ideas underlying functional supply chain systems will be of similar use to readers from more industrially-based backgrounds.
Author: Stanley B. Gershwin Publisher: Springer Science & Business Media ISBN: 1461510198 Category : Business & Economics Languages : en Pages : 443
Book Description
Analysis and Modeling of Manufacturing Systems is a set of papers on some of the newest research and applications of mathematical and computational techniques to manufacturing systems and supply chains. These papers deal with fundamental questions (how to predict factory performance: how to operate production systems) and explicitly treat the stochastic nature of failures, operation times, demand, and other important events. Analysis and Modeling of Manufacturing Systems will be of interest to readers with a strong background in operations research, including researchers and mathematically sophisticated practitioners.
Author: Percy H. Brill Publisher: Springer Science & Business Media ISBN: 0387094210 Category : Mathematics Languages : en Pages : 502
Book Description
From 1972 to 1974, I was working on a PhD thesis entitled Multiple Server Queues with Service Time Depending on Waiting Time.The method of analysis was the embedded Markov chain technique, described in the papers [82] and [77]. My analysis involved lengthy, tedious deri- tions of systems of integral equations for the probability density function (pdf) of the waiting time. After pondering for many months whether there might be a faster, easier way to derive the integral equations, I ?nally discovered the basic theorems for such a method in August, 1974. The theorems establish a connection between sample-path level-crossing rates of the virtual wait process and the pdf of the waiting time. This connection was not found anywhere else in the literature at the time. I immediately developed a comprehensive new methodology for deriving the integral equations based on these theorems, and called it system point theory. (Subsequently it was called system point method,or system point level crossing method: SPLC or simply LC.) I rewrote the entire PhD thesis from November 1974 to March 1975, using LC to reach solutions. The new thesis was called System Point Theory in Exponential Queues. On June 12, 1975 I presented an invited talk on the new methodology at the Fifth Conference on Stochastic Processes and their Applications at the University of Maryland. Many queueing theorists were present.
Author: David Simchi-Levi Publisher: Taylor & Francis ISBN: 9781402079528 Category : Business & Economics Languages : en Pages : 840
Book Description
The Handbook is a comprehensive research reference that is essential for anyone interested in conducting research in supply chain. Unique features include: -A focus on the intersection of quantitative supply chain analysis and E-Business, -Unlike other edited volumes in the supply chain area, this is a handbook rather than a collection of research papers. Each chapter was written by one or more leading researchers in the area. These authors were invited on the basis of their scholarly expertise and unique insights in a particular sub-area, -As much attention is given to looking back as to looking forward. Most chapters discuss at length future research needs and research directions from both theoretical and practical perspectives, -Most chapters describe in detail the quantitative models used for analysis and the theoretical underpinnings; many examples and case studies are provided to demonstrate how the models and the theoretical insights are relevant to real situations, -Coverage of most state-of-the-art business practices in supply chain management.
Author: Konstantin Kogan Publisher: Springer Science & Business Media ISBN: 0387727760 Category : Business & Economics Languages : en Pages : 515
Book Description
In today’s global economy, operations strategy in supply chains must assume an ever-expanding and strategic role of risks. These operational and strategic facets entail a brand new set of operational problems and risks that have not always been understood or managed very well. This book provides the means to understand, to model and to analyze these outstanding issues and problems that are the essential elements in managing supply chains today.
Author: J. George Shanthikumar
Author: J. George Shanthikumar
Author: J. MacGregor Smith
Author: David D. Yao
Author: George Liberopoulos
Author: David D. Yao
Author: Dong-Ping Song
Author: Stanley B. Gershwin
Author: Percy H. Brill
Author: David Simchi-Levi
Author: Konstantin Kogan