Serial Communication Protocols and Standards PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Serial Communication Protocols and Standards PDF full book. Access full book title Serial Communication Protocols and Standards by Dawoud Shenouda Dawoud. Download full books in PDF and EPUB format.
Author: Dawoud Shenouda Dawoud Publisher: CRC Press ISBN: 1000796914 Category : Science Languages : en Pages : 393
Book Description
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.
Author: Dawoud Shenouda Dawoud Publisher: CRC Press ISBN: 1000796914 Category : Science Languages : en Pages : 393
Book Description
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.
Author: Dawoud Shenouda Dawoud Publisher: ISBN: 9788770221542 Category : Serial communications Languages : en Pages : 0
Book Description
Due to the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. The main aim of the book is to provide communication engineers enough knowledge to match the right protocol and standard with the right application.
Author: Louis Frenzel Publisher: Newnes ISBN: 0128006714 Category : Technology & Engineering Languages : en Pages : 340
Book Description
This book catalogs the most popular and commonly used serial-port interfaces and provides details on the specifications and the latest standards, enabling you to select an interface for a new design or verify that an interface is working correctly. Each chapter is based on a different interface and is written in an easy to follow, standard format. With this book you will learn: The most widely used serial interfaces How to select the best serial interface for a specific application or design The trade-offs between data rate and distance (length or range) The operation and benefits of serial data transmission The most common media used for serial data transmission Covers the most popular and commonly used interfaces and provides details on their specifications and standards Explains the key concepts to enable an engineer to select an interface for a new design or verify that an interface is working correctly Each chapter is based on a different interface and is written in an easy to follow, standard format
Author: Dawoud Shenouda Dawoud Publisher: CRC Press ISBN: 1000793540 Category : Science Languages : en Pages : 607
Book Description
Over recent years industries have faced the problem of how to connect devices to ‘speak’ to each other with minimum wiring. Philips Semiconductors faced this problem when they needed to connect many ICs together. The Automotive Industry faced the same problem when it needed to connect tens of microcontrollers in each car. Recently, with smart homes, the problem has started to be part of each home. For instance, you may want to build your smart home with accessories from different manufacturers and you want the devices to ‘speak’ to each other. Added to that, you may want to control them from a central App or voice assist. Solutions for this problem started with the introduction of Inter Integrated Circuits (IIC) and Controller Area Networks (CAN). Both solutions are wired networks that allow ICs and microcontrollers to be connected in a network to communicate together. In smart home automation, a number of common smart home automation protocols that allow different devices to speak and communicate together have appeared during the last few decades. Some of the smart home protocols come under the umbrella of what is called the “Internet of Things (IoT)”. The proposed protocols can be grouped into wired networks e.g. X10, UPB; wireless or radio networks as ZigBee, Z-Wave, Bluetooth; or dual (wired and radio) such as Insteon. This book introduces to the reader some of the most popular Microcontroller and Smart home networks. The book covers in detail the following protocols:• I2C• I3C• CAN• ZigBee• ZigBee Pro• Z-Wave• Bluetooth Wi-Fi, WiMax and Insteon are part of our companion book “Serial Communication Protocols and Standards”. This book gives detailed comparisons between the various protocols. To complete the knowledge of the reader, the book gives in the last chapter a short summary on the protocols that we did not fully cover in this volume: Ethernet, Thread, Insteon, X10 and UPB.
Author: Cisco Networking Academy Publisher: Cisco Press ISBN: 0133476502 Category : Computers Languages : en Pages : 569
Book Description
Connecting Networks Companion Guide is the official supplemental textbook for the Connecting Networks course in the Cisco® Networking Academy® CCNA® Routing and Switching curriculum. This course discusses the WAN technologies and network services required by converged applications in a complex network. The course allows you to understand the selection criteria of network devices and WAN technologies to meet network requirements. You will learn how to configure and troubleshoot network devices and resolve common issues with data link protocols. You will also develop the knowledge and skills needed to implement IPSec and virtual private network (VPN) operations in a complex network. The Companion Guide is designed as a portable desk reference to use anytime, anywhere to reinforce the material from the course and organize your time. The book’s features help you focus on important concepts to succeed in this course: Chapter objectives–Review core concepts by answering the focus questions listed at the beginning of each chapter. Key terms–Refer to the lists of networking vocabulary introduced and highlighted in context in each chapter. Glossary–Consult the comprehensive Glossary with 195 terms. Summary of Activities and Labs–Maximize your study time with this complete list of all associated practice exercises at the end of each chapter. Check Your Understanding–Evaluate your readiness with the end-of-chapter questions that match the style of questions you see in the online course quizzes. The answer key explains each answer. How To–Look for this icon to study the steps you need to learn to perform certain tasks. Interactive Activities–Reinforce your understanding of topics with all the different exercises from the online course identified throughout the book with this icon. Videos–Watch the videos embedded within the online course. Packet Tracer Activities–Explore and visualize networking concepts using Packet Tracer exercises interspersed throughout the chapters. Hands-on Labs–Work through all the course labs and Class Activities that are included in the course and published in the separate Lab Manual.
Author: Drago Hercog Publisher: Springer Nature ISBN: 3030504050 Category : Computers Languages : en Pages : 382
Book Description
This book provides comprehensive coverage of the protocols of communication systems. The book is divided into four parts. Part I covers the basic concepts of system and protocol design and specification, overviews the models and languages for informal and formal specification of protocols, and describes the specification language SDL. In the second part, the basic notions and properties of communication protocols and protocol stacks are explained, including the treatment of the logical correctness and the performance of protocols. In the third part, many methods for message transfer, on which specific communication protocols are based, are explained and formally specified in the SDL language. The fourth part provides for short descriptions of some specific protocols, mainly used in IP networks, in order to acquaint a reader with the practical use of communication methods presented in the third part of the book. The book is relevant to researchers, academics, professionals and students in communications engineering. Provides comprehensive yet granular coverage of the protocols of communication systems Allows readers the ability to understand the formal specification of communication protocols Specifies communication methods and protocols in the specification language SDL, giving readers practical tools to venture on their own
Author: Orhan Gazi Publisher: Springer Nature ISBN: 3030616983 Category : Technology & Engineering Languages : en Pages : 319
Book Description
This textbook teaches students techniques for the design of advanced digital systems using Field Programmable Gate Arrays (FPGAs). The authors focus on communication between FPGAs and peripheral devices (such as EEPROM, analog-to-digital converters, sensors, digital-to-analog converters, displays etc.) and in particular state machines and timed state machines for the implementation of serial communication protocols, such as UART, SPI, I2C, and display protocols, such as VGA, HDMI. VHDL is used as the programming language and all topics are covered in a structured, step-by-step manner.
Author: John Park Publisher: Newnes ISBN: 9780750657976 Category : Business & Economics Languages : en Pages : 412
Book Description
Overview of Data Communications; Basic Data Communication Principles; Physical Serial Communication Standards; Error Detection; Cabling Basics; Electrical Noise and Interference; Modems and Multiplexers; Introduction to Protocols; Open Systems Interconnection Model; Industrial Protocols; HART Protocol; Open Industrial Fieldbus and DeviceNet Systems; Local Area Networks; Appendix A: Numbering Systems; Appendix B: Cyclic Redundancy Check (CRC) Program Listing; Appendix C: Serial Link Design; Glossary.
Author: Feng Zhang Publisher: Springer Nature ISBN: 9811518688 Category : Technology & Engineering Languages : en Pages : 373
Book Description
This book describes the most frequently used high-speed serial buses in embedded systems, especially those used by FPGAs. These buses employ SerDes, JESD204, SRIO, PCIE, Aurora and SATA protocols for chip-to-chip and board-to-board communication, and CPCIE, VPX, FC and Infiniband protocols for inter-chassis communication. For each type, the book provides the bus history and version info, while also assessing its advantages and limitations. Furthermore, it offers a detailed guide to implementing these buses in FPGA design, from the physical layer and link synchronization to the frame format and application command. Given its scope, the book offers a valuable resource for researchers, R&D engineers and graduate students in computer science or electronics who wish to learn the protocol principles, structures and applications of high-speed serial buses.
Author: Eric D. Knapp Publisher: Syngress ISBN: 0124201849 Category : Computers Languages : en Pages : 460
Book Description
As the sophistication of cyber-attacks increases, understanding how to defend critical infrastructure systems—energy production, water, gas, and other vital systems—becomes more important, and heavily mandated. Industrial Network Security, Second Edition arms you with the knowledge you need to understand the vulnerabilities of these distributed supervisory and control systems. The book examines the unique protocols and applications that are the foundation of industrial control systems, and provides clear guidelines for their protection. This how-to guide gives you thorough understanding of the unique challenges facing critical infrastructures, new guidelines and security measures for critical infrastructure protection, knowledge of new and evolving security tools, and pointers on SCADA protocols and security implementation. All-new real-world examples of attacks against control systems, and more diagrams of systems Expanded coverage of protocols such as 61850, Ethernet/IP, CIP, ISA-99, and the evolution to IEC62443 Expanded coverage of Smart Grid security New coverage of signature-based detection, exploit-based vs. vulnerability-based detection, and signature reverse engineering
Author: Dawoud Shenouda Dawoud
Author: Dawoud Shenouda Dawoud
Author: Dawoud Shenouda Dawoud
Author: Louis Frenzel
Author: Dawoud Shenouda Dawoud
Author: Cisco Networking Academy
Author: Drago Hercog
Author: Orhan Gazi
Author: John Park
Author: Feng Zhang
Author: Eric D. Knapp