Waste Materials and By-Products in Concrete PDF Download

Author: Rafat Siddique
Publisher: Springer Science & Business Media
ISBN: 3540742948
Category : Technology & Engineering
Languages : en
Pages : 416

View

Book Description
The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.

Author: Satish Chandra
Publisher: Elsevier
ISBN: 0815519516
Category : Technology & Engineering
Languages : en
Pages : 672

View

Book Description
The environmental aspects involved in the production and use of cement, concrete and other building materials are of growing importance. CO2 emissions are 0.8-1.3 ton/ton of cement production in dry process. SO2 emission is also very high, but is dependent upon the type of fuel used. Energy consumption is also very high at 100-150 KWT/ton of cement produced. It is costly to erect new cement plants. Substitution of waste materials will conserve dwindling resources, and will avoid the environmental and ecological damages caused by quarrying and exploitation of the raw materials for making cement. To some extent, it will help to solve the problem otherwise encountered in disposing of the wastes. Partial replacement of clinker or portland cement by slag, fly ash, silica fume and natural rock minerals illustrates these aspects. Partial replacement by natural materials that require little or no processing, such as pozzolans, calcined clays, etc., saves energy and decreases emission of gases. The output of waste materials suitable as cement replacement (slags, fly ashes, silica fumes, rice husk ash, etc.) is more than double that of cement production. These waste materials can partly be used, or processed, to produce materials suitable as aggregates or fillers in concrete. These can also be used as clinker raw materials, or processed into cementing systems. New grinding and mixing technology will make the use of these secondary materials simpler. Developments in chemical admixtures: superplasticizers, air entraining agents, etc., help in controlling production techniques and, in achieving the desired properties in concrete. Use of waste products is not only a partial solution to environmental and ecological problems; it significantly improves the microstructure, and consequently the durability properties of concrete, which are difficult to achieve by the use of pure portland cement. The aim is not only to make the cements and concrete less expensive, but to provide a blend of tailored properties of waste materials and portland cements suitable for specified purpose. This requires a better understanding of chemistry, and materials science. There is an increasing demand for better understanding of material properties, as well as better control of the microstructure developing in the construction material, to increase durability. The combination of different binders and modifiers to produce cheaper and more durable building materials will solve to some extent the ecological and environmental problems.

Author: Jorge de Brito
Publisher: Woodhead Publishing
ISBN: 0128208953
Category : Technology & Engineering
Languages : en
Pages : 810

View

Book Description
Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more. Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM. Favors the institution of the circular economy in the construction industry by eliminating the barriers that currently prevent industrial waste from being valorized by its inclusion in CBM design Features an in-depth exploration of the strengths and weaknesses of new raw materials and their application to CBMs Features real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others Presents current, state-of-the-art, and future-prospects for the use of industrial waste in CBMs

Author: Mirza, Jahangir
Publisher: IGI Global
ISBN: 1522583262
Category : Technology & Engineering
Languages : en
Pages : 169

View

Book Description
Due to the demand for new urban construction, its repair, and its maintenance, the concrete and construction enterprises continue to grow, as do their use of finite natural resources. The industry is now under pressure to seek ways to minimize the use of rapidly depleting natural resources. Effective utilization of various waste materials, often found in abundance, may be the key as they not only ward off deleterious environmental hazards, but they have also been known to produce wealth by adding value through ecology. Recycled Waste Materials in Concrete Construction: Emerging Research and Opportunities is a detailed scholarly resource that discusses different types of industrial, agricultural, and natural wastes that are either currently in use in the concrete industry or demonstrate potential for future use and how they can be used as additives or replacements for cement and other construction materials. Highlighting topics such as engineering properties, material durability, and raw materials, this books targets engineers, construction professionals, contractors, consulting firms, government officials, cement and waste material industries, policymakers, academicians, and researchers.

Author: Jorge de Brito
Publisher: Springer Science & Business Media
ISBN: 1447145402
Category : Technology & Engineering
Languages : en
Pages : 453

View

Book Description
Concrete is the most used man-made material in the world since its invention. The widespread use of this material has led to continuous developments such as ultra-high strength concrete and self-compacting concrete. Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste focuses on the recent development which the use of various types of recycled waste materials as aggregate in the production of various types of concrete. By drawing together information and data from various fields and sources, Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste provides full coverage of this subject. Divided into two parts, a compilation of varied literature data related to the use of various types of industrial waste as aggregates in concrete is followed by a discussion of the use of construction and demolition waste as aggregate in concrete. The properties of the aggregates and their effect on various concrete properties are presented, and the quantitative procedure to estimate the properties of concrete containing construction and demolition waste as aggregates is explained. Current codes and practices developed in various countries to use construction and demolition waste as aggregates in concrete and issues related to the sustainability of cement and concrete production are also discussed. The comprehensive information presented in Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste will be helpful to graduate students, researchers and concrete technologists. The collected data will also be an essential reference for practicing engineers who face problems concerning the use of these materials in concrete production.

Author: Aeslina Abdul Kadir
Publisher: Springer Nature
ISBN: 9813349182
Category : Technology & Engineering
Languages : en
Pages : 300

View

Book Description
This book highlights the current research, conceptual and practical utilization of waste in building materials. It examines the production of industrial and agricultural wastes that have been generated worldwide and have significant environmental impact. The book discusses how to incorporate these wastes effectively with greener technology and how to address its environmental impact in order to produce environmentally friendly and sustainable green products. This book also will capitalize on its practical application, properties, performance and economic advantages. The topics covered include the physical, mechanical and environmental properties, leaching behaviour, gas emissions and performance of sustainable construction materials. This book offers a valuable reference for researchers, industries and interested stakeholders in sustainable construction or any allied fields.

Author: Florence Bart
Publisher: Springer Science & Business Media
ISBN: 1461434459
Category : Technology & Engineering
Languages : en
Pages : 266

View

Book Description
As the re-emergence of nuclear power as an acceptable energy source on an international basis continues, the need for safe and reliable ways to dispose of radioactive waste becomes ever more critical. The ultimate goal for designing a predisposal waste-management system depends on producing waste containers suitable for storage, transportation and permanent disposal. Cement-Based Materials for Nuclear-Waste Storage provides a roadmap for the use of cementation as an applied technique for the treatment of low- and intermediate-level radioactive wastes. Coverage includes, but is not limited to, a comparison of cementation with other solidification techniques, advantages of calcium-silicate cements over other materials and a discussion of the long-term suitability and safety of waste packages as well as cement barriers.

Author: Rafat Siddique
Publisher: Woodhead Publishing
ISBN: 0081021577
Category : Technology & Engineering
Languages : en
Pages : 640

View

Book Description
Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. Focuses on material properties and applications (as well as ‘sustainability’ aspects) of cementitious materials Assembles leading researchers from diverse areas of study Ideas for use as a ‘one stop’ reference for advanced postgraduate courses focusing on sustainable construction materials

Author: Francesco Colangelo
Publisher: Woodhead Publishing
ISBN: 0128230134
Category : Technology & Engineering
Languages : en
Pages : 730

View

Book Description
The Handbook of Sustainable Concrete and Industrial Waste Management summarizes key research trends in recycling and reusing concrete and industrial waste to reduce their environmental impact. This volume also includes important contributions in collaboration with the CRI-TEST Innovation Lab, Naples – Acerra. Part one discusses eco-friendly innovative cement and concrete and reviews key substitute materials. Part two analyzes the use of industrial waste as aggregates and the mechanical properties of concrete containing waste materials. Part three discusses differences between innovative binders, focusing on alkali-activated and geopolymer concrete. Part four provides a thorough overview of the life cycle assessment (LCA) of concrete containing industrial wastes and the impacts related to the logistics of wastes, the production of the concrete, and the management of industrial wastes. By providing research examples, case studies, and practical strategies, this book is a state-of-the-art reference for researchers working in construction materials, civil or structural engineering, and engineers working in the industry. Offers a systematic and comprehensive source of information on the latest developments in sustainable concrete; Analyzes different types of sustainable concrete and innovative binders from chemical, physical, and mechanical points of view; Includes real case studies showing application of the LCA methodology.

Author: Alan Richardson
Publisher: Springer Science & Business Media
ISBN: 1447153766
Category : Technology & Engineering
Languages : en
Pages : 156

View

Book Description
The construction industry is the largest single waste producing industry in the UK. Ensuring a supply chain of recycled materials affords many potential gains, achieved through: reducing the material volume transported to already over-burdened landfill sites, possible cost reductions to the contractor/client when considering the landfill tax saved and the potential for lower cost material replacements, a reduction in the environmental impact of quarrying and the saving of depleting natural material resources. Reuse of Materials and Byproducts in Construction: Waste Minimization and Recycling addresses use of waste and by products in the construction industry. An over view of new “green” design guides to encourage best practice will be examined and current legislation that channels on site practices, such as site waste management plans. Fundamental individual construction materials are discussed and the process of reforming by products and waste products into new construction materials is investigated, examining the material performance, energy required to convert waste into new products and viability of recycling. The main range of constructional materials will be examined. Aimed at postgraduate students, lecturers and researchers in construction and civil engineering, the book will also be of interest to professional design practices.