Handbook of Serial Communications Interfaces PDF Download

Author: Louis Frenzel
Publisher: Newnes
ISBN: 0128006714
Category : Technology & Engineering
Languages : en
Pages : 340

View

Book Description
This book catalogs the most popular and commonly used serial-port interfaces and provides details on the specifications and the latest standards, enabling you to select an interface for a new design or verify that an interface is working correctly. Each chapter is based on a different interface and is written in an easy to follow, standard format. With this book you will learn: The most widely used serial interfaces How to select the best serial interface for a specific application or design The trade-offs between data rate and distance (length or range) The operation and benefits of serial data transmission The most common media used for serial data transmission Covers the most popular and commonly used interfaces and provides details on their specifications and standards Explains the key concepts to enable an engineer to select an interface for a new design or verify that an interface is working correctly Each chapter is based on a different interface and is written in an easy to follow, standard format

Author: Dawoud Shenouda Dawoud
Publisher: CRC Press
ISBN: 1000796914
Category : Science
Languages : en
Pages : 393

View

Book Description
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.

Author: North American Serials Interest Group. Conference
Publisher: Psychology Press
ISBN: 9780866566544
Category : Language Arts & Disciplines
Languages : en
Pages : 218

View

Book Description
These lively proceedings from NASIG's inaugural conference address the status and problems of serials throughout the English speaking world. Experts address various aspects of serials librarianship--automation, standards, online public access catalogs and serials, pricing, and more. Whether one is interested in obtaining an excellent guide to automating serials departments, reading about discriminatory pricing of British scholarly journals for the North American market, or learning more about serials in the U.K. from the Chair of the United Kingdom Serials Group (UKSG), this stimulating book has something for every member of the serials information chain.

Author: Mark De Binder
Publisher: Serial Connections
ISBN: 0979589703
Category : Fiction
Languages : en
Pages : 309

View

Book Description
Chase Benton, founder of Serial Connections, is a shaman and psychic who began his company to capture the most notorious serial killers. He uses an artificial intelligence system that works with shamans, psychics, and former Special Forces operatives to accomplish what government can't.

Author: Joe Campbell
Publisher: Prentice Hall
ISBN:
Category : C (Computer program language)
Languages : en
Pages : 680

View

Book Description
Communications will play a central role in the computer applications of the next decade. The core of these applications is asynchronous serial communication. This book includes both theoretical and practical discussions of this topic, allowing programmers and technically advanced users to build their own C programming library of functions for serial communications.

Author: Finley Breese
Publisher: BoD – Books on Demand
ISBN: 3839184606
Category :
Languages : en
Pages : 54

View

Book Description
- Protocol and Topology Considerations - Linux Reference Implementation - Microcontroller Reference Implementation - Virtual COM Port Concept for MS Win This pamphlet shares the practical experience with a simple, yet versatile data aquisition and remote control topology using the Real-time Transport Protocol for IP-based, soft real-time machine-to-machine communication. A Control Data Profile for RTP is discussed along with reference applications of RTP/CDP for bridging serial local bus communication over the Internet Protocol. Furthermore, in-depth implementational details are provided for an exemplary Linux userspace RTP/CDP software as well as for a functional stack and state machine of a RTP/CDP-to-RS232 adapter using an 8-bit microcontroller. On non-Linux platforms, RTP/CDP sessions can be interfaced by virtual COM ports. This concept is discussed in detail and may be combined with the beforementioned adapters to solve the problem of missing physical COM ports in recent computers.

Author: Cisco Networking Academy
Publisher: Cisco Press
ISBN: 0133476502
Category : Computers
Languages : en
Pages : 569

View

Book Description
Connecting Networks Companion Guide is the official supplemental textbook for the Connecting Networks course in the Cisco® Networking Academy® CCNA® Routing and Switching curriculum. This course discusses the WAN technologies and network services required by converged applications in a complex network. The course allows you to understand the selection criteria of network devices and WAN technologies to meet network requirements. You will learn how to configure and troubleshoot network devices and resolve common issues with data link protocols. You will also develop the knowledge and skills needed to implement IPSec and virtual private network (VPN) operations in a complex network. The Companion Guide is designed as a portable desk reference to use anytime, anywhere to reinforce the material from the course and organize your time. The book’s features help you focus on important concepts to succeed in this course: Chapter objectives–Review core concepts by answering the focus questions listed at the beginning of each chapter. Key terms–Refer to the lists of networking vocabulary introduced and highlighted in context in each chapter. Glossary–Consult the comprehensive Glossary with 195 terms. Summary of Activities and Labs–Maximize your study time with this complete list of all associated practice exercises at the end of each chapter. Check Your Understanding–Evaluate your readiness with the end-of-chapter questions that match the style of questions you see in the online course quizzes. The answer key explains each answer. How To–Look for this icon to study the steps you need to learn to perform certain tasks. Interactive Activities–Reinforce your understanding of topics with all the different exercises from the online course identified throughout the book with this icon. Videos–Watch the videos embedded within the online course. Packet Tracer Activities–Explore and visualize networking concepts using Packet Tracer exercises interspersed throughout the chapters. Hands-on Labs–Work through all the course labs and Class Activities that are included in the course and published in the separate Lab Manual.

Author: Michael Margolis
Publisher: "O'Reilly Media, Inc."
ISBN: 1449313876
Category : Computers
Languages : en
Pages : 725

View

Book Description
Create your own robots, toys, remote controllers, alarms, detectors, and more with the Arduino device. This simple microcontroller has become popular for building a variety of objects that interact with the physical world. These recipes provide solutions for the most common problems and questions Arduino users have.

Author: Yongquan Fan
Publisher: Springer Science & Business Media
ISBN: 9048193982
Category : Technology & Engineering
Languages : en
Pages : 194

View

Book Description
High-Speed Serial Interface (HSSI) devices have become widespread in communications, from the embedded to high-performance computing systems, and from on-chip to a wide haul. Testing of HSSIs has been a challenging topic because of signal integrity issues, long test time and the need of expensive instruments. Accelerating Test, Validation and Debug of High Speed Serial Interfaces provides innovative test and debug approaches and detailed instructions on how to arrive to practical test of modern high-speed interfaces. Accelerating Test, Validation and Debug of High Speed Serial Interfaces first proposes a new algorithm that enables us to perform receiver test more than 1000 times faster. Then an under-sampling based transmitter test scheme is presented. The scheme can accurately extract the transmitter jitter and finish the whole transmitter test within 100ms, while the test usually takes seconds. The book also presents and external loopback-based testing scheme, where and FPGA-based BER tester and a novel jitter injection technique are proposed. These schemes can be applied to validate, test and debug HSSIs with data rate up to 12.5Gbps at a lower test cost than pure ATE solutions. In addition, the book introduces an efficieng scheme to implement high performance Gaussian noise generators, suitable for evaluating BER performance under noise conditions.

Author: Cecilia Gimeno Gasca
Publisher: Springer
ISBN: 3319105639
Category : Technology & Engineering
Languages : en
Pages : 148

View

Book Description
This book introduces readers to the design of adaptive equalization solutions integrated in standard CMOS technology for high-speed serial links. Since continuous-time equalizers offer various advantages as an alternative to discrete-time equalizers at multi-gigabit rates, this book provides a detailed description of continuous-time adaptive equalizers design - both at transistor and system levels-, their main characteristics and performances. The authors begin with a complete review and analysis of the state of the art of equalizers for wireline applications, describing why they are necessary, their types, and their main applications. Next, theoretical fundamentals of continuous-time adaptive equalizers are explored. Then, new structures are proposed to implement the different building blocks of the adaptive equalizer: line equalizer, loop-filters, power comparator, etc. The authors demonstrate the design of a complete low-power, low-voltage, high-speed, continuous-time adaptive equalizer. Finally, a cost-effective CMOS receiver which includes the proposed continuous-time adaptive equalizer is designed for 1.25 Gb/s optical communications through 50-m length, 1-mm diameter plastic optical fiber (POF).